Welcome to our store!
Welcome to our store!
Customer Support [email protected]

Walksnail Avatar HD Kit V2 (Dual Antenna Version)

$176.00 $88.00

Package Includes:1x Walksnail Avatar HD Kit V21x Data Cable1x Hardware PacketFeaturesDual antennasCompatible 4K1080P 120fps compatibility22ms low latencyRanging Mode4KM rangeLight weight designFOV160Built-in 32G storage,Support Gyroflow6V-25.2VThe only nat


SKU: KD16030532 Category:

Package Includes:

1x Walksnail Avatar HD Kit V2

1x Data Cable

1x Hardware Packet

Features

  • Dual antennas
  • Compatible 4K
  • 1080P 120fps compatibility
  • 22ms low latency
  • Ranging Mode
  • 4KM range
  • Light weight design
  • FOV160
  • Built-in 32G storage,
  • Support Gyroflow
  • 6V-25.2V
  • The only native 4:3 high-definition sensor in the FPV industry

Bullet Points for Walksnail Avatar HD Kit V2 (Dual Antennas)

  • The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with low latency.
  • Camera V2 with 2K pixels, 4:3 native sensor for better image quality and native 4:3 mode image ratio allows you to capture more of the surrounding scenery while flying the drone, resulting in more comprehensive and visually appealing images.Meanwhile, it’s better fit for regular FPV race as well.
  • The camera ( 32G VTX KIT)supportsGyroflow, take you a smooth and stable video quality.
  • The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.
  • Updated the design of PCB board and shell, improved the quality of VTX, more durable.
  • Optimized the installation place of the antenna, so as to better protect the VTX.
  • The position of the frequency binding button has been changed to make the frequency binding operation more convenient.
  • A spare pad is added to provide two power connection modes.
  • New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability . Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.
  • The AvatarVTX comes with 32g built-in storage it can record 1080p or 720p HD flight videos without interference. 32G built-in storage, recording video time increased by 4 times.
  • Supports both high frame rate and standard frame rate, it has an average latency of 22ms with thehigh frame rate.
  • Designed to carry dual antennas to achieve more stable and powerful signals. The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable.

  • Q:Do we support 1080P 120FPS?
  • A:Our VTX products all support 1080P/120FPS, and can reach 1080P/120FPS through firmware upgradeis around the corner.

Specification
Camera
Model Avatar V2 camera
Image Sensor 1/3.2-Inch 4Mp 4:3sensor
Resolution 1080P/60fps; 720P/100fps; 720P/60fps;1080P/120fps compatibility; 1080P/100fps compatibility;
Ratio 4:3 native /16:9
Lens 2.1mm
FOV 160
Aperture F2.0
Shutter Rolling shutter
Min.Illumination 0.001Lux
Weight 7.2g
Dimensions 19*19*22mm
Coaxial Cable 140mm
Gyroflow Only 32G VTX Supported
VTX
Model Avatar V2 module(Dual Antenna)
Communication Frequency 5.725-5.850GHz
Transmitter Power (EIRP) FCC:<30dBm;CE:<14dBm;SRRC:<20dBm;MIC:<25dBm
1/O Interface JST1.0*4(Power in)JST0.8*6(USB)
Mounting Holes 25.5*25.5mm; 20*20mm
Dimensions 33.5*33.5*10.5mm
Storage 32G
Recording 1080p/720p
Weight 15.4g
Operating Temperature -20-40
Channels 8
Wide Power Input 6V-25.2V
Supported FC System Betaflight; Inav; Fettec; ArduPilot; Kiss
OSD Canvas mode
Latency Average delay 22ms
Antenna 2(IPEX)
Avatar V2 antenna
Polarization LHCP
Bandwidth 5600MHz-6000MHz
Gain 1.9dBi
VSWR 1.5
Input Impedance 50
Interface IPEX-1
Size R15 X 45mm without cable
Weight 2g

Reviews

There are no reviews yet.

Be the first to review “Walksnail Avatar HD Kit V2 (Dual Antenna Version)”

Your email address will not be published. Required fields are marked *

Related products