The Caipirinha II is based on the Wipeout by HappyFlyers from Switzerland! A polycarbonate battery bay, push-to-open equipment bays, a PDB with up to 3 battery inputs, wiring channels that stretch across the entire wing, and a huge 6mm-plywood-lined center section are just some of the innovations that make this plane stand out from the rest. An ultra-sleek and aerodynamic finish ensures that no energy goes to waste, and a very good glide slope makes thermaling or long distance sloping highly enjoyable.

We can confidently say it’s going to be the only long-range cruiser you will ever need, and the only flying wing in its weight class with such a performance envelope.

Features

• Small, lightweight, fly anywhere design
• Ultimate in flight stability and endurance
• Virtually indestructible EPP/Plywood construction
• Pre-cut camera, servo, battery, R/C receiver and video transmitter slots
• 2x push-to-open equipment bays for R/C and FPV electronics
• Pre-cut, sanded and covered ultra-lightweight elevons & pushrods

Specifications

• 36.5in / 93cm wingspan!
• 50oz / 1400g AUW (including GoPro Session5 and battery)
• 90min flying time
• 45mi / 75km endurance
• Battery (4S):
  • Capacity: 4500mAh 4S – 6600mAh 4S, 20C or more
  • SUGGESTED Dimension: 48 x 36 x 150 mm, 525g
  • MAX Dimension: 60 x 44 x 165 mm, 550g

Recommended FPV and Radio equipment

• FPV camera: TBS ZeroZero II or TBS69
• Video transmission:
  • 5.8GHz: TBS FPVision or TBS UNIFY PRO V3 with TBS CORE PRO
  • 2.4GHz: TBS CORE PRO with Unify 500mW / 800mW VTx
• Crossfire Micro Rx or Diversity Rx

Preliminary Manual (for experts only):

1. Lay out electronics (dry-fit)
2. Glue wing halves together
3. Set up radio gear and electronics
4. Set elevon travel +8mm, -6mm
5. AIL EXPO 60%, ELE EXPO 50%
6. Mount propeller
7. Fly, Crash, Repair, Repeat!