The SkyStarsRC F7HD PRO4 stack/combo is the perfect choice for those looking for a reliable and powerful flight control system. Featuring an F722 FC and a KM60 AM-32 32Bit 60A 4in1 ESC, this stack is capable of handling 3-6S and can be counted on to provide smooth flying in any situation. Its MPU6000 ensures stable and accurate performance.

This SkyStarsRC F7HD PRO4 F7 3-6S 30×30 Stack/Combo boasts huge soldering pads, proper spacing to avoid solder bridges, ESC connector on top for convenient repairs, TVS diode for reverse-polarity protection, 3A BEC power, pads arranged to minimize wire overlap, and gyroscope independent power supply.Withnopower lines near MPU6000 Gyro to avoid any EMI interference. Every single unit is pre-tested with quality control. This stack supports a DJI O3 connector and a VTX ON/OFF Pit Switch. INAV and I2C are supported with this stack as well.

Check out our other30x30 Stacks,and ourSkystarsRCcollection!

Features

• Excellent over-current capability:By adopting the best PCB material and PCB production process. With the application of high TG materials, 3oz copper PCB & 2m gold deposition process on PCB. Together with the 6-layer layout design of board, compared with other common 4 layers, It can withstand a bigger current.
• Extreme stably support 6S LiPo battery:By use of 24 pcs of new Toshiba standard 40V 5×6 Mosfet & imported from USA or Japan electronic materials. Plus advanced lead-free SMT Processing technology. Making the ESC fully able to support a 6S battery and get a better performance.
• Excellent heat dissipation performance:The CNC hollow aluminum alloy shell usedis great forheat dissipation.
• Better control performance:Flashed with the latest AM_32 firmware in factory, support telemetry functions (including voltage, RPMS & current )

Specifications

SKYSTARS F7HD Pro4 Flight controller:

• MCU: STM32F722RET6 216MHz
• Gyroscope: MPU6000
• Baro: Bmp280
• OSD: Betaflight SPI OSD DJI HD OSD(UART6)
• Black box: 16MB
• 6x Uarts: UART 1/2/3/4/5/6
• 4x PWM outputs
• 1x I2C
• 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
• USB Type-C(USB2.0)
• 1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
• 1x JST-SH1.0_6pin connector (10V/Gnd/TX6/RX6/Gnd/Sbus)
• VTX 10V/Vbat filtered power ON/OFF Pit switch
• Any spare UART supports DJI FPV OSD
• LED: 4 LED independent pads, support WS2812 programming lamp output.
• Receiver: Support Sbus, crsf, ibus, SBUS, XBUS, support 3.3v Spektrum satellite receiver, The default receiver input is UART1(You can solder ELRS RX on UART1), F7 has a built-in inverter, which can actually be installed in any spare UART.
• Input voltage: 3-6S
• BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI O3
• LDO 3.3V: Max.250mA
• BetaFlight firmware: SKYSTARSF722Pro
• INAV firmware: SKYSTARSF722HD
• Installation size: 30.5×30.5mm. The installation hole is M4 and supports shock column installation.
• External size 39x39mm
• Flight control weight: 6.9g
• Flight control onboard voltage sensor

AM60 AM_32 60A 32Bit 3-6S 30.5mm 4in1 ESC:

• Input voltage: 3-6S LiPo
• Con.Current: 60A
• Peak Current: 70A 10S
• Firmware: AM_32
• Support: Dshot 600/1200
• Mounting hole: 30.5X30.5 mm/M3
• BEC: No
• Product size: 41x46x7.6mm
• Weight: 18g

Includes

• 1x SkyStarsRC F722 HD PRO4 3-6S 30×30 Stack/Combo (F722 FC / KM60 AM-32 32Bit 60A 4in1 ESC) – MPU6000
• 8x Silicon grommets M4 to M3
• 2x JST-SH1.0_8pin cable, 4cm
• 1x JST-GH-6P cable for DJI port, 10cm

Wiring Diagram