Skystars RC flagship H743 Dual Gyro Flight Controller with X8 support, OSD, dual BMI270 gyro, BMP280 barometer, 16M blackbox, 8 UARTS, and more. The powerful MCU running at 480MHz should future-proof any new firmware updates coming in the next few years.

Package Includes:
1x Skystars RC H7 Dual Gyro 30×30 Flight Controller
4x Vibration Dampening Grommets
2x JST-SH1.0_8pin cable
1x JST-GH-6P cable for DJI port

Dual gyro sensors provide super accurate response for improved flight and feel.

Specs:

• MCU: STM32H743VIT6, 480MHz , 1MB RAM, 2MB Flash
• Gyro: BMI270dual
• Baro: BMP280
• OSD: AT7456E
• Blackbox: 16M
• 8x Uarts (1,2,3,4,6,7,8) with built-in inversion.
• 8x PWM outputs
• 1x I2C
• 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
• USB Type-C(USB2.0)
• 2x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
• 1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V)
• Dual Camera Inputs switch
• VTX 10V/Vbat filtered power ON/OFF switch
• DJI FPV OSD is supported by any spare UART
• Vbat Input: 7~25V (2~6S LiPo)
• BEC: 5V 2A Continuous (Max 3A)
• LDO 3.3V: Max 250mA
• Firmware: Betaflight – SKYSTARSH7HD
• Mounting: 30.5 x 30.5mm
• Dimensions: 39.5 x 39.5 x 7.8 mm
• Weight: 10.1g