A 30.5×30.5mm FC with a plug for your HD system.

Package includes:

1x F7HD Pro3 FC

4x M3 silicon grommets

1x JST-GH-6P cable for DJI port, 10cm

Specs:

• MCU: STM32F722RGT6 216MHz
• Gyroscope: BMI270
• Baro: BMP280
• OSD: Betaflight SPI OSD / DJI HD OSD (UART6)
• Black box: 16MB
• Uarts: 6 available
• 4x PWM outputs
• 1x I2C
• 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
• USB Type-C (USB2.0)
• VTX 10V / Vbat filtered power ON/OFF switch
• DJI FPV OSD supported by any spare UART.
• LED: 4independent LED pads, supports WS2812.
• Type of receiver supported: Sbus, CRSF, ibus, XBUS, Spektrum satellite receiver(The default receiver input is on UART1)
• Input voltage: 3-6S
• BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI
• LDO 3.3V: Max.250mA
• BetaFlight firmware: SKYSTARSF722Pro
• INAV firmware:SKYSTARSF722HD
• Mounting holes: 30.5×30.5mm
• Real size 39x39mm
• Weight: 6.9g