Big Baby is a 150mm X8 for 3″ props. It has a 4mm base plate and a 2mm top plate. The motors are stacked using low profile 2mm catdog mounts. Stack height is 25mm, but you can run taller standoffs if you need the room. The Lumenier Lux7 is recommended for X8’s. The frame is drilled for 2 30×30 and 20×20 stacks.

More standoff options can be found here: M3 Standoffs

Check out all ourFrames,and the rest of ourShendrones Products!

The fpv cam mount and antenna mounts wedge in the DJI air unit.

I’m running 1407 2800kv’s with a 850 6s.

You can 3D print the parts yourself! The files arehere,orif you need the parts 3D printed, please send the appropriate STL files to [email protected], and we will invoice you separately for them! 3Dprinted parts need 24-48 hours to be printed and shipped depending on the size and quantity.

Package Includes:

• 1 xShen Drones Big Baby 3″ Frame – Carbon and Hardware Only

Note: Camera, Battery, and Electronics NOT included.