If your current 1S whoop lacks the power you need, the Mobula8 is the upgrade youve been waiting for. Happymodels first 85mm frame features the X12 series flight controller, EX1103 KV11000 motors, and Gemfan Hurricane 2023 tri-blade propellers, delivering impressive thrust and remarkably smooth flight characteristics for high-performance backyard flying.

Package Includes:

1x Mobula8 (ELRS 2.4G SPI)

1x Accessory Package

Specifications:

Motor

Mode: EX1103 KV11000

Configuration:9N12P

Stator Diamter:11mm

Stator Length:3mm

Shaft Diameter:?1.5mm

Motor Dimension(Dia.*Len):?13.5mm*15.5mm

Weight(g):3.8g

No.of Cells(Lipo):1-2S

Propellers

Weight:0.88g

Material: PC

Pitch:2.3inch

Props Dia:52.17mm

Centre Thickness:5mm

Centre Hole Dia:1.5mm

Flight controller

X12 ELRS V2.1 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280

MCU:STM32F411CEU6 (100MHZ, 512K FLASH)

Sensor: ICM20689 or ICM42688P(SPI connection)

Mount hole size: 25.5mm*25.5mm

Power supply: 1-2S battery input (DC 2.9V-8.7V)

Built-in 12A(each) Blheli_S 4in1 ESC

Built-in Betaflight OSD(SPI Control)

Built-in 5.8G OpenVTX 0mw~400mw

Built-in ExpressLRS 2.4G

Built-in voltage detection

Built-in current sensor

Onboard 4in1 ESC

Power supply: 1-2S LiPo/LiPo HV

Current: 12A continuous peak 15A (3 seconds)

Support BLHeliSuite programmable

Firmware target: Z_H_30

Default protocol: DSHOT300

Support Bluejay firmware

Onboard SPI ExpressLRS 2.4GHz Receiver

Packet Rate option: 50Hz/150Hz/250Hz/500Hz

ExpressLRS Firmware version: V2.0

RF Frequency: 2.4GHz

Antenna : SMD antenna

Telemetry output Power: <12dBm

Receiver protocol: SPI ExpressLRS

Compatible with ExpressLRS V2.0 TX Module

Couldnt flash separately ExpressLRS firmware

Could flash FC firmware to support ExpressLRS v3.0 TX module

Onboard 5.8g OPENVTX

Firmware version: OPENVTX

Smartaudio v2.1

PIT Mode support

RCE Mode support

Channels:48ch

Transmitting Power: 0/RCE/25mw/100mw/400mw

Power supply: DC 5V

Current (5v): <650ma (400mw)

Caddx ANT 1200tvl camera

Image Sensor: 1/3? CMOS Sensor

Horizontal Resolution: 1200 TVL

TV System: NTSC or PAL

IMAGE: 16:9 or 4:3

Synchronization: Internal

Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000

S/N Ratio : >52dB (AGC OFF)

Video Output: CVBS

Lens: 1.8mm

Min. Illumination: [email protected]

Auto Gain Control: YES

WDR: Global WDR

DNR: 3D DNR

Dimensions: 14*14mm(with bracket to 19*19mm)

Wide Power Input: DC 3.7-18V

Weight: 2g (N.W.)