The GM62 series motor by iPower Motors is the ultimate brushless gimbal motor for DSLR / CANON 5D MARKII,

MARKIII Cameras. This motor is designed for large scale multi-rotor platforms looking to lift Red Epic & DSLR sized gear

4KG/cm Torque. The principle of the camera stabilization using brushless direct-drive motors, In fact, gimbal based

on BLDC motors is very similar to regular gimbal based on hobby servo.

Specifications

Model: GM6208

Motor Out Diameter: 69.50.05mm

Configuration: 24N/28P

Motor Height: 240.2mm (Included with Encoder housing)

Hollow Shaft(OD): 25-0.01/-0.015 mm

Hollow Shaft(ID): 22 0.05/ 0 mm

Wire Length: 6103mm

Cable AWG: #24

Motor Weight: 2490.5g

Wire plug: 2.5mm dupont connector

No-load current: 0.080.1 A

No-load volts: 20 V

No-load Rpm: 209~231 RPM

Load current: 1.2 A

Load volts: 20 V

Load torque(gcm): 2600-3600

Motor internal resistance: 325%Resistance varies with temperature

High voltage test: DC500V 1mA @2sec

Rotor housing runout: 0.1mm

Steering (axle extension): clockwise

High-low temperature test:

High temperature: Keep at 60 for 100 hours, and the motor can work normally after 24 hours at room temperature

Low temperature: Keep at -20 for 100 hours, and the motor can work normally after 24 hours at room temperature

Maximum power: 25W

Working current: 3-5S

Working temperature: -20~60;10~90%RH

Packing List

1 x GM6208-150T Gimbal Motor