The GM52 series motor by iPower Motors is the ultimate brushless gimbal motor for DSLR / CANON 5D MARKII, MARKIII Cameras.

This motor is designed for large-scale multi-rotor platforms looking to lift Red Epic & DSLR sized gear 4KG/cm Torque.

The principle of the camera stabilization using brushless direct drive motors, In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo.

Specifications

Model: GM5208-24

Motor Out Diameter: 59.50.05mm

Configuration: 24N/22P

Motor Height: 31.20.2mm

Hollow Shaft(OD): 15-0.008/-0.012 mm

Hollow Shaft(ID): 12.6 0.05/0 mm

Wire Length: 6103mm

Cable AWG: #24

Motor Weight: 2040.5g

Wire plug: 2.5mm dupont connector

No-load current: 0.090.1 A

No-load volts: 20V

No-load Rpm: 396~436 RPM

Load current: 1A

Load volts: 20V

Load torque(gcm): 1800-2500

Motor internal resistance: 13.75%Resistance varies with temperature

High voltage test: DC500V 10mA @1sec

Rotor housing runout: 0.1mm

Steering (axle extension): clockwise

High-low temperature test:

High temperature: Keep at 60 for 100 hours, and the motor can work normally after 24 hours at room temperature

Low temperature: Keep at -20 for 100 hours, and the motor can work normally after 24 hours at room temperature

Maximum power: 40W

WorkingVoltage: 3-5S

Working temperature: -20~60;10~90%RH

Packing List

1 x GM5208-24 gimbal motor

1 x Screw bag