The GM35 series motor by iPower Motors is the ultimate brushless gimbal motor for SLR and similar weight Cameras. This motor is designed for large-scale multi-rotor platforms looking to lift SLR sized gear 1.5KG/cm Torque. The principle of the camera stabilization using brushless direct drive motors, In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo.

Specifications

Model: GM3506

Motor Out Diameter: 400.05mm

Configuration: 24N/22P

Motor Height: 17.80.2mm (Included with Encoder housing)

Hollow Shaft(OD): 12-0.008/-0.012 mm

Hollow Shaft(ID): 8.6 0.05/0 mm

Wire Length: 6103mm

Cable AWG: #24

Motor Weight: 640.2g

Wire plug: 2.5mm dupont connector

No-load current: 0.170.05 A

No-load volts: 16V

No-load Rpm: 2149~2375 RPM

Load current: 1A

Load volts: 12V

Load torque(gcm): 600-1000

Motor internal resistance: 5.65%Resistance varies with temperature

High voltage test: DC500V 1mA @2sec

Rotor housing runout: 0.1mm

Steering (axle extension): clockwise

High-low temperature test:

High temperature: Keep at 60 for 100 hours, and the motor can work normally after 24 hours at room temperature

Low temperature: Keep at -20 for 100 hours, and the motor can work normally after 24 hours at room temperature

Maximum power: 25W

Working current: 2-3S

Working temperature: -20~60;10~90%RH

Packing List

1 x GM3506 gimbal motor