The Flycolor Trinx G20 32Bit 60A 3-6S 20×20 4in1 ESC packs powerful features into a compact 20x20mm package. It boasts a 32-bit processor, up to 60A of current, and supports 3-6S batteries for a reliable experience forhigh-end FPV. Achieve more security for your flights with the Trinx G20!

Check out all our20x20 ESCsand all ourFlycolor Products!

FEATURES

• ARM 32-bit Cortex MCU STM32G0, frequency up to 64 MHz.
• PWM frequency up to 128K, high frequency for higher throttle makes
• running smoother.
• Compared with the previous generation of ESC, the ESC firmware is
• optimized, making the throttle linearity smoother and the response faster.
• Miniaturized and lightweight design, better routing, and component layout.
• 20×20 mounting holes to meet the installation requirements of diversified
• frames.
• Built-in current sensor and VBAT output.
• Supports regular 1-2ms pulse width input, as well as Oneshot125
• (125-250us), Oneshot42 (41.7-83.3us) and Multshot (5- 25us). The input
• signal is automatically detected by the ESC upon power-up.
• All Dshot and Proshot signals are supported.
• Damped light does regenerative braking, causing very fast motor
• retardation, and inherently also does active freewheeling.
• Supports higher power load, more suitable for violent flight of racing drones.
• Conformal coating for extra protection
• Large soldering tabs
• Low ESR capacitor and XT60 cable included

Specification

• Model: Flycolor TRINX G20
• Con. Current: 60A
• Burst Current: 70A (10s)
• BEC: No BEC
• LiPo cells: 3-6S
• Weight: 14.4g
• Size: 44x36x6.3mm
• Mounting: 20x20mm,M3
• Configurator: BLHeliSuite32
• Firmware: Flycolor_Raptor_5

Includes

• 1xFlycolor Trinx G20 32Bit 60A 3-6S 20×20 4in1 ESC
• 4x Silicone vibration absorber
• 5x O-Ring
• 1x Power cable+XT60
• 1x FC/ESC connecting wire
• 1x Low ESR capacitor
• 1x Aluminum heat sink