Welcome to our store!
Welcome to our store!
Customer Support [email protected]

FETtec V1.1 35A 3-6S 20×20 4in1 ESC

$104.49 $52.25

The FETtec 35 amp 4in1 ESCs is a great board on its own, now the magic comes from KISS FC Passthrough and other KISS Features. For example Dshot2400, 128kHz motor PWM, Dshot 300-2400, and128kHz motor PWM. As being version 1.1 they fixed issues like not hav


SKU: PPHP19622448 Category:

The FETtec 35 amp 4in1 ESCs is a great board on its own, now the magic comes from KISS FC Passthrough and other KISS Features. For example Dshot2400, 128kHz motor PWM, Dshot 300-2400, and128kHz motor PWM. As being version 1.1 they fixed issues like not having to install a capacitor close to the mounting holes.You will see an increased area around the battery soldering pads for safer use. Also adding a new protection circuit for the signal IOs to the board.One blue LED for each ESC onboard, grab this 20×20 board for those quads that need them!

The perfect compliment to your FETtec Kiss FC!

Check out all ourKISS compatible gear, andeverything FETtec!

Features

  • More space around battery pads
  • One blue LED for each ESC onboard
  • New protection circuit for the signal IOs
  • No more capacitors close to the mounting holes

Specifications

  • Active current limiting @ 35A
  • Input voltage: 3S-6S
  • High quality 40V MOSFETs
  • STM32G071 @ 64MHz
  • 128 kHz motor PWM
  • Weight: 6.4g(board only)
  • Full sine wave control
  • Solder points for up to 5 additional capacitors
  • KISS FC Passthrough
  • Betaflight pass-through (available from 4.1)
  • Automatic input signal detection:
    • Dshot 300-2400
    • PWM
    • OneShot42 / 125
    • OneWire BUS with up to 8kHz looptime (one cable for all motor signals and telemetry)
  • New FETtec Firmware
  • FETtec Configurator for updated, configuration and telemetry. Standalone for MacOS, Windows 32 & 64 bit and Chrome Plugin
  • Dimensions: 30mm x 35mm
  • Mounting hole: 20mm x 20mm, M2 breakable for M3

Manual Download
FETtec Configurator

Includes

  • 1x FETtec 35A V1.1 3-6S 20×20 4in1 ESC
  • 1x Capacitor 50V, ESR < 1ohm (477CKE050M)
  • 1x JST-SH 8 Pin Cable

Reviews

There are no reviews yet.

Be the first to review “FETtec V1.1 35A 3-6S 20×20 4in1 ESC”

Your email address will not be published. Required fields are marked *

Related products