For those just starting out with FPV drones and on a budget, BabyApe is a great choice. It builds on the design of the first generation of BabyApe, but with a higher spec and only a small price increase, making it the perfect starter drone for the cost-conscious flyer.

DarwinFPV has always been committed to designing cost-effective FPV drone. They have accepted feedback from pilots, solved the problems that pilots are most concerned about, and brought better products to everyone who uses them. Adhering to these beliefs, DarwinFPV brings BabyApe .

BabyApe is a 3.5-inch small freestyle FPV drone with a take-off weight of less than 250g that fulfills most countries’ regulations. The BabyApe has a more powerful configuration, adopts a more reliable manufacturing process and a new power system, and has a higher level of performance, durability, and power. The flight time can reach 13 minutes, the flight distance is 1.5 kilometers, and the maximum speed is up to 92km/h.

The 4S version comes with powerful 1504-3600Kv motors, and choose between PNP (No RX) or ELRS 2.4GHz for your receiver!

Check out our otherpre-built quads,as well as the rest of ourDarwinFPV selection!

Features

• Compared with similar products of other brands, BabyApe only sells for $139.99, which once again perfectly reflects the super high-cost performance
• It comes with 1504 motors and 3.5-inch propellers, the power is stronger and the response speed is faster;
• The camera and stack are protected by glue potting, which effectively prevents the risk of damage due to contact with metal particles, fine sand, gravel, weeds or dew, and the entire electronic system is more reliable and durable;
• The addition of a buzzer and extra LED lights is extremely beneficial for beginners, who frequently confront circumstances such as over-discharge the battery and locating drones due to mistakes that lead the drone to crash;
• The independent action camera base can be used with naked GoPro, thumb camera, etc. to record amazing images during flight at 4K/60 frames.

Specifications

• Brand: DarwinFPV
• Model: BabyApe 4S
• Frame: Wide X
• Wheelbase: 156mm
• Size: 126mmx150mmx50mm
• Flight Control: F411 MPU6500 AT7456E
• FirmwareDARWINF411
• Firmware: BETAFPV_Nano_2400_RX
• The receiver’s factory firmware is ELRS_V3.2.0
• Reserved port: 1x SBUS(RX1 reverse)2x Uarts(1,2)2x Softserial, 1x I2C1x RGB1x Buzzer1x USER(A15)1x USB
• ESC: Bluejay 48KHz 3-6S 30A
• Motor:4S version1504-3600KV
• Propeller: HQProp T3.5x2x3GR-PC
• Weight: 135.4 g (analog version)
• Receiver: ELRS 2.4GHz

Darwin FPV “Cement” Ultra Durable FPV Drone Camera

• Sensor type1/3″ CMOS Sensor
• Image16:9
• TV System: NTSC
• Horizontal Resolution1200TVL
• Lens2.1mm 160
• Electronic Shutter: 1/50~1/100000 sec
• Video Output: CVBS
• Min. Illumination0.001Lux
• wb: automatic
• DNR: 3D DNR
• WDR: 100db
• Input voltage: DC 3.7-24V
• Working current80mA@DC12V/170mA@DC5V
• IP: IP67
• Size19x19mm
• Weight7.9g

DarwinFPV 25/200/400/600mW VTX

• Output Power: 25/200/400/600mW(adjustable)
• Frequency: 5.8Hz 40port
• Power Supply Voltage Range: 5V
• Weight: 3.5g
• Pitch: 28x15mm(length x width)
• Protocol: SmartAudio
• Indicator Light Description:

Includes

• 1x DarwinFPV BNF Baby Ape V2 3.5″ Analog Micro Quad – 4S – Choose Your Receiver
• 4x HQProp T3.5x2x3GR-PC
• 2x Battery cable strip ( 10x170mm)
• 2x EVA shock padthickness10
• 1x Spare screws bag
• 1x Sticker
• 1x Manual