Dual Frequency General Purpose Multibeam Imaging Sonar for Murky Water Survey and Inspection

Integrated into Controller
0.1 to 120m Range
Dual Frequency Mode

The Blueprint M750D is a dual-frequency multibeam sonar that offers high resolution imagery up to 120m, an integrated velocimeter for improved accuracy, and a peak operating frequency of 1.2MHz.

Sonar for Search and Recovery
In search and recovery operations, First Responders looking for evidence or drowning victims typically sweep an area using side scan sonar, identify potential targets and then investigate those targets to see if it is in fact the victim.

Low-visibility Operations
Cameras and divers eyes are often unable to effectively search due to poor visibility underwater. An imaging sonar is the best tool to then re-identify the target, since oftentimes side scan data does not produce an exact location (so navigating back to the potential target can be difficult). Once the target is re-identified, the sonar can be used to continue to track the target as you move closer, and when you get close enough, it can even be used to perform the visual verification.

Sonar for Hull Inspection
In inspection operations, particularly in murky water applications, it can be difficult to use just a camera to get an understanding of the condition of a structure.

For example, when inspecting the hull of a ship, you want to see if there are any major defects or corrosion, damage to the coating, zincs, anodes, propeller, check the coating condition, and check if the hull needs to be cleaned.