Camera Butter Cinema ONE Frame with 7/8″ Arms!

Check out all our Frames and the rest of our Camera Butter Products!

You’ve never seen a frame like this – Designed to be stable, cinematic and easy to tune, this frame can do it all.

• Maybe you want a 7 inch long-range efficiency monster?Use the 7 inch arms in quasi-X configuration to squeeze every second out of your flight time
• What about a full-on cinematic 7 inch without props in view with low camera tilt?Flip the 7 inch arms over and it turn it into a deadcat 7!
• Or maybe you wantan 8 inch long-distance efficiency monster? Those 7-inch arms will also fit 8 inch props in quasi-X configuration.

TheCamera Butter Cinema ONEframe istheresult of countless prototypes and revisions to get everything exactly the way it needs to be:

• Super solid due to the unique reinforcing piece that keeps all of the arms stable and locked in place.
• Split bottom plate keeps everything tight and reduces vibrations.
• Strength where it needs it, but still light @ 136gwith 7/8 inch arms.
• Arms can be swapped out (or flipped over to change configuration!) with just 2 screws
• Arm screws are NOT used for the stack, keeping vibrations down to a minimum
• Slammeddesign to keep in compact and strong, or you can use longer standoffs for more open builds
• Lots ofplaces for your components: 20×20 and 30×30 mount in the middle, 20×20 mount in the rear (fits a caddx Vista perfectly), and a second 20×20 mount in the front can be used if your camera is moved forward.
• 16×16 and 19×19 motor mount configuration

There are free STL files for 3D printable mounts available for theGoPro Hero 8,GoPro Hero 9andInsta360 One R 1 inch.

Because the tolerances in the parts are very tight, this frame can be difficult to assemble the first time you put it together. although after the first time it’s much easier to disassemble/reassemble.

Made in Canada withhigh quality carbon.

Package Includes:

• All 3 plates, center brace
• 7/8″ arms
• Battery pad
• 2 (short and long) TPU FPV camera mounts
• 2 TPU SMA mounts
• Hardware package (includes 30×30 and 20×20 stack screws and Caddx Vista or rear stack screws)
• Camera Butter super-grip battery strap
• Camera Butter sticker

Overview and build how-to: