CRUX35 is an ultra-lightweight 3.5Inch FPV Freestyle FPV Racing Drone, the weight of the whole drone is only 87g for the analog version. The Crux35 drone uses Happymodel EX1404 high-efficiency motor and HQPROP 3.5-inch three-blade propeller to ensure the largest thrust-to-weight ratio under the most efficient premise, which can bring you a smooth Freestyle flying experience.

The analog version is equipped with CADDXFPV Ant ant camera.

The receiver versionis theUART ExpressLRS ( SPI version is discontinued )

Recommended (Not Included): Battery 4S 14.8v 750mAh to maximum 1100mAh.

You can choose from ourCompatible 4S Lipo Packs here

Check out The HappyModel Crux35 Frame and Parts Collection, all our Analog BNF Drones and the rest of our Happymodel Products!

Features

• Ultra-lightweight 3.5-inch BNF FPV Freestyle Drone
• Integrated ExpressLRS UART receiver
• High efficiency EX1404 power system
• Can be equipped with Naked Gopro or SMO4K
• Support 3-4S battery 4S 750mah battery is recommended, maximum support 4S 1100mah

Specifications

• Wheelbase: 150mm
• Weight: Crux35 87gram
• Size: 130mmx130mmx45mm(without propellers)
• Receiver: UART ExpressLRS 2.4GHz
• Caddx Ant Camera +OVX303 or OVX306 VTX
• Flying time: 9min~15min 4s 750mah battery

Motor

• Model: EX1404
• KV options: KV3500
• Configu-ration:9N12P
• Stator Diamter:14mm
• Stator Length:4mm
• Shaft Diameter: 1.5mm
• Motor Dimension(Dia.*Len):15mm*15mm
• Weight(g):9g

Propellers

• Propeller Diameter: 3.5 inch
• Pitch : 2
• Blades : 3
• Material : Poly Carbonate
• Weight : 1.5g
• Hub Diameter : 10mm
• Hub Thickness:4.7mm
• Shaft :1.9/1.5/1.9mm
• Adaptor Rings : NO

Flight controller

• (UART ELRS Version)
• CrazybeeF411 ELRS
• MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
• Sensor: ICM42688P or BMI270 (SPI Control)
• Mount pattern: 25.525.5 M2
• Size:32*32*5mm
• Power supply: 2-4S Lipo battery
• Built-in 20A Blheli_s ESC each
• Built-in Betaflight OSD(SPI Control)
• Built-in UART ExpressLRS 2.4GHz receiver
• Built-in 5V 1.5A BEC
• Flight controller firmware target: CRAZYBEEF4DX

Onboard 4in1 ESC

• MCU upgraded to EFM8BB21
• Power supply: 2-4S LiPo/LiPo HVCurrent: 12A continuous peak 15A (3 seconds)
• Support BLHeliSuite programmable
• Factory firmware: F-H-40
• Default protocol: DSHOT300

Onboard UART ExpressLRS 2.4GHz Receiver

• Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
• RF Frequency: 2.4GHzAntenna plug: IPEX
• Telemetry output Power: <12dBm
• Receiver protocol: CRSF
• Default firmware version: ExpressLRS V3.0.1

(Analog version)
Caddx ANT 1200tvl camera

• Image Sensor: 1/3 CMOS Sensor
• Horizontal Resolution: 1200 TVL
• TV System: NTSC or PAL
• IMAGE: 16:9 or 4:3
• Synchronization: Internal
• Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
• S/N Ratio : >52dB (AGC OFF)
• Video Output: CVBS
• Lens: 1.8mm
• Min. Illumination: [email protected]
• Auto Gain Control: YES
• BLC: YES
• WDR: Global WDR
• DNR: 3D DNR
• Dimensions: 14*14mm(with bracket to 19*19mm)
• Wide Power Input: DC 3.7-18V
• Work Temperature: -20~+60
• Weight: 2g (N.W.)

OVX303/306 5.8Ghz VTX

• Model: OVX303/306
• Frequency: 5.8G 40CH
• Transmitting Power: 0/RCE/25mw/100mw/300mw
• Power supply: DC 5V
• Current (5v): <650ma (300mw)
• Weight: 1.5gram without antenna

Package Includes:

• 1 x Crux35 Frame
• 1 x CrazyF411 ELRS FC with UART ELRS
• 1 x Caddx Ant Camera
• 1 x Happymodel OVX303/306 5.8G analog VTX
• 4 x Happymodel EX1404 KV3500 brushless motor
• 1 x HQProp T3.5X2X3Grey (4cw+4ccw)
• 1 x Screw Driver
• 1 x Buckle Velcro for battery