Skystars F7HD Stack with30x30 F722HD Pro4 Flight Controller & KM50A 50A ESC! The flight controller Includes6 UARTS, a 10V 3A Regulator for Caddx Vista or DJI Air Unit, and 8MB Blackbox! The flight controller also has convenient solder pads placed at each corner for easy wiring of LED’s. The KM50A ESCis stable for 6S voltages due to the use of lots of SMD capacitors and a large heatsink forheat dissipation and style.Flashed withthe latestBlheli_32firmwareit alsosupport telemetry functions (including voltage RPMS & current)!

Check out all ourStacksand the rest of ourSkystars Products!

Skystars F7HD Pro4 Features:

• Voltage Input: 3-6S(11.1V~22.2V)
• Processor: STM32F722RGT6 216MHz
• IMU: MPU6000
• Uarts: 6
• BEC: 5V @ 3A, 10V @ 3A
• DJI Connector: DJI FPV Video Transmitter
• Barometer: Yes
• LED: 4 independent LED pads, support WS2812 programming
• OSD: Betaflight OSD & DJI MSP OSD (UART6)
• Firmware: SKYSTARS F7HD
• USB connection: USB-C
• Buzzer Pad: YES
• Black Box: 16MB
• CURR Pad: YES
• RSSI Pad: YES
• Mounting Holes: 30.5×30.5mm / M3
• Weight: 6.8g

Skystars KM50A ESC Features:

• Flashed with the latest Blheli_32 firmware
• Highly Efficient ( Low Specific Heat Capacity ) heatsink for better cooling
• Use of Aluminum alloy for heatsink
• MOSFET’s imported from the United States
• Panasonic ZLH Ultra Low ESR Capacitor
• PCB uses 3oz Copper which reduces heat and increase system efficiency
• Large motor pads for easy soldering
• Support telemetry functions ( Voltage ,RPMS & Current )
• Inbuild overcurrent protection
• Vibration isolation rubber to prevent cracks during crash
• Supports custom ESC startup tone

Skystars KM50A ESC Specifications:

• Input voltage : 3-6S LiPo / LiHV
• Firmware : Blheli_32
• Continuous Current : 50A
• Peak Current : 60A (10S)
• Overcurrent Protection : Yes
• ESC Protocol : Dshot 600/1200
• Mounting Hole Pattern : 30.5mm / M3
• BEC : NO
• Product size : 41x46x7.6mm
• Weight : 17g

Package Includes:

• 1 x SkystarsF7HD Pro 4 30.5×30.5mmFlight Controller
• 1 x SKYSTARS KM50A 32Bit 3-6S 30.5×30.5mm 4in1 ESC
• 4 x M3x20mm Screws
• 4 x M3x30mm Screws
• 4 x M3 Nylon Nuts
• 10 x Rubber Grommets
• 1 x XT60 Connector
• 1 x 8pin JST FC to ESC Cable
• 1 x 6pin JST FC to DJI Air Unit Cable
• 1 x 14AWG 10CM Battery Cable
• 1 x 35V 560uF Capacitor