This AIO has a rating of IP67, In ideal conditions submersion of 1 meter for 30 minutes can be achieved.

Introducing the all-new DarwinFPV Hulk AIO! Having IP67 water-resistant grading, 45A BLS ESC, and Onboard ELRS SPI receiver. This AIO is ready for any adventure that you can and couldn’t take your drone!!!

Check out our other AIO Flight Controllers and our Darwin FPV products!

Specifications

AIO F411

• MCU: STM32F411CEU6
• Gyro: MPU6500
• OSD Chip: Betaflight OSD AT7456E
• Blackbox:16MB
• UARTS:5
• I2C: SDA / SLA pads
• LED: Yes
• Beeper: Yes
• Firmware Target: MATEKF405
• FC Mounting Pattern: 30x30mm
• Dimensions:37x36x10.8mm

AIO ESC

• Input Voltage: 2-6S
• Max. Continuous Current: 45A
• Max. Burst Current: 55A
• MCU: EFM8BB21F16G
• Current Sensor: Yes
• Mounting Dimensions:25 x 25 M2
• Dimensions46.2mm x 39.5mm x 10mm
  

Includes

• 1x Darwin FPV HULK F411/45A 3-6S AIO w/ ELRS 2.4GHz

Pleaseattention:

• Seawaterishighlycorrosive,itisnotrecommendedforuseinseawater.Please wash it withfreshwaterimmediatelyandthendryit.
• Supports a 3-6S battery, remember not to plug the battery’s positive and negative interface in reverse, otherwise, it will burn out.
• AfterreceivingtheAIO,firstconnectto a computeronBetaflightsoftwaretocheckwhetherthegyroscopeandaccelerometeraredetected andwhetherthegyroscopeattitudeisnormal.
• IncreasethethrottleinBetaflightsoftwaretoensurethenormalrotationandcorrectrotationdirectionofthe4motors,andtheninstallthepropellersforatestflight;besuretoremovethepropellerswhenpullingthethrottleinBetaflightsoftwaretoavoidaccidents.
• Afterconfirmingtheaboveprecautionswithoutanyproblems,youcaninstallthepropellersandstartflying!

Wiring Diagram