Firefly Nano Baby 20 is equipped with the most efficient micromotor and the top AIO flight control on the market. It will bring you an unprecedented flying experience. The drone could do all the acrobatic motions smoothly, like diving and power looping.

Check out our otherpre-built quads, as well asother great products fromFlywoo!

Specifications

• Weight: 44.44g (without battery)
• FC & ESC : GOKU Versatile F405 2S 12A AIO
• Frame: Firefly 2S Nnano Baby 20 VISTA Frame kit
• Motors: Flywoo ROBO 1002 15500KV
• Props: Gemfan 2015-2 blade
• Link & Camera : Naked RunCam Link Wasp Nano

GOKU Versatile F4 5-IN-1 1S AIO FC / VTX

• SIZE: 30x30mm
• Weight: 4.1g
• Hole: 25.5×25.5-3mm
• MCU: STM32F405
• UARTS:6
• MOTOR: M1-M4 OUTPUT I2C: SCL/SDA
• GYRO: ICM42688
• Barometer: ICM42688
• LED: 2x WS2812
• Flash: 8M
• BEC: 5V 2A
• Firmware: FLYWOOF405S_AIO

Onboard 4in1 ESC

• Built-in 1S/2S 12A BL_S 4in1 ESC
• Support Oneshot125, Oneshot42, Multishot,
• Dshot150, Dshot300, Dshot600
• Input Voltage: 1-2S Lipo
• Firmware: BLHELI_S
• Firmware: Z_H_30_REV16.7

Flywoo ROBO 1002 15500Kv Motor

• KV: 15500Kv
• Input Voltage: 2S LiPo
• Stator Dimensions: 10mm x 2mm
• Shaft Diameter: 1.5mm
• Wire Dimensions: 30AWG x 40mm
• Weight (with wires): 2.4g

Nano Wasp HD Camera

• Dimensions: L18mmxW14mmxH18mm
• LENS: FOV D:160 H:127 V:92
• Resolution: 720P@120fps(4:3)
• Net Weight: 6g(With Cable)
• Shutter: Rolling Shutter
• Coaxial Cable: 80 mm
• Image Sensor: 1/3″

Naked Link Air Unit

• Input Voltage: 7.4-26.4V@ 4-9W
• Operating Frequency: 5.725-5.850 GHz
• Transmitter Power: (EIRP) FCC/SRRC: <30 dBm; CE: <14 dBm
• Min. Latency (end-to-end): 1280 x 720 60fps: 32 ms
• Max. Transmission Distance: FCC/SRRC: 4 km; CE: 0.7 km;
• I/O Interface: Type-C, IPEX, 3-in-1 port,
• Supported Flight Control System: BetaFlight
• Operating Temperature Range: 0 to 40 C (32 to 104 F)

Includes

• 1x Flywoo BNF Firefly 2S Nano Baby 20 HD 2″ Quad w/ Naked RunCam Link & RunCam Wasp – Choose Receiver
• 2x set of 2015-2 props
• 1x Screw spare packs
• 2x Battery holder
• 4x Prop guards