OpenRacer – Hardware Kit… Complete hardware kit for the OpenRacer 5″ Racing Frame…

Note: This kit supports “original” full size OpenRacer pod canopies / front & rear braces… (If you’re planning on building a “Pro Canopy” OpenRacer addition hardware is required…)

Weight: total hardware kit weight 29 grams +/-1g

Included:

– M325mm Button Head Screw (4x) – FC Stack Studs
– M316mm Flat Head Screw (4x) – Outer Arms / Standoff Studs
– M312mm Flat Head Screw (4x) – Inner Arm Screws
– M312mm Button Head Screw (8x) – Braces / Inner Motor Screws
– M38mm Button Head Screw (8x) – Outer Motor Screws
– M36mm Button Head Screw (4x) – Pod Canopy Screws
– M3 Hex Nut (8x) – FC Stack Nuts
– M310mm Knurled Standoffs (4x) – Standoffs
– S-M3-2 Self Clinching Nut (8x) – Arms Nuts

Note:Hardware kit contains a mix of Grade 10.9 & 12.9 Hardware… We will be upgrading to 12.9 based on bulk availability…

For more information on OpenRacer project: or to support the designer visit OpenRacer on GitHub @https://github.com/OpenRacer/OpenRacer

Subscribe to the designer of OpenRacer’s YouTube (best drone racing content on YouTube) @https://youtube.com/@IvanEfimovLimon?si=lQIrxau4PQUdVq77