DJI Power 1000 SDC for robust energy storage

The DJI Power 1000 is designed for adventurers and tech enthusiasts who require dependable power in remote locations.

It features a robust 1024Wh LFP battery and can deliver up to 2200W, allowing you to power everything from drones to mobile devices efficiently.

Comprehensive port selection

This power station boasts an extensive selection of ports to cover all your charging needs. With two high-powered USB-C PD ports, traditional USB-A, and dual AC outlets, it’s equipped to handle multiple devices simultaneously.

Specialty ports like SDC and SDC Lite are perfect for charging specific types of equipment.

Safety assured

The Power 1000 doesn’t compromise on safety. It is tested by SGS and equipped with an intelligent BMS, temperature monitoring, and power outage protection, ensuring your devices and power station are always protected under any condition.

Diverse recharging options

Recharge your power station via AC grid power, solar panels, or a car charger.

The optional solar and car charging accessories offer flexibility for recharging in any environment, complemented by a quick visual reference through a built-in color display that shows essential stats at a glance.

Specifications

General

• Model

• DYM1000L/DYM1000H

• Capacity

• 1024 Wh

• Net Weight

• Approx. 13 kg

• Dimensions

• 448225230 mm (LWH)

• Number of Ports

• AC Output 2
  USB-C 2
  USB-A 2
  SDC1
  SDCLite1
  AC Input 1

• Max Operating Altitude

• 3000 m

Output Specifications

• AC Output

• DYM1000L: AC 100-120 V, 50/60 Hz, max continuous output: 2200 W,* max output: 2600 W (total),** peak output: 4400 W
  DYM1000H: AC 220-240 V, 50/60 Hz, max continuous output: 2200 W,* max output: 2600 W (total),** peak output: 4400 W

  AC output data varies by country and region.
  Given that the voltage in Japan is 100 V, the max continuous output power of the Japanese version is 2000 W.
  * At a room temperature of 25 C (77 F), Power 1000 can stably provide a max continuous output of 2200 W until the battery runs out. Data measured in a DJI laboratory.
  ** At an output power of 2600 W, the DYM1000L prototype can sustain for 30 seconds, and the DYM1000H prototype can sustain for 60 seconds. Durations were measured when DJI Power 1000 is at approx. 25 C (77 F) and 50% battery level. Duration may vary due to differences in battery temperature and battery level. Refer to the actual usage. It is recommended to use max power output when the battery is at a moderate temperature and a relatively higher battery level. Data measured in a DJI laboratory.

• AC Output (Bypass Mode)

• DYM1000L: AC 100-120 V, 12 A, 1440 W
  DYM1000H: AC 220-240 V, 10 A, 2200 W

• USB-A Output

• 5 V, 3 A
  9 V, 2 A
  12 V, 2 A
  Max output power per channel: 24 W

• USBC Output

• 5 V, 5 A
  9 V, 5 A
  12 V, 5 A
  15 V, 5 A
  20 V, 5 A
  28 V, 5 A (EPR)
  Max output power per channel: 140 W*

  * Each USB-C port supports a max output power of 140 W. The device being charged must support the PD 3.1 protocol and use a USB cable that meets EPR specifications.

• SDC and SDC Lite Output

• SDC: 9-27 V, max current: 10 A, max output power: 240 W
  SDC Lite: 9-27 V, max current: 10 A, max output power: 240 W

  Both of the SDC and SDC Lite ports support extensive accessories.

Input Specifications

• AC Input

• DYM1000L: AC 100-120 V, 1200 W (recharging), 1440 W (Bypass mode)
  DYM1000H: AC 220-240 V, 1200 W (recharging), 2200 W (Bypass mode)

• SDC and SDC Lite Input

• SDC: DC 32-58.4 V, max 400 W, 8 A
  SDC Lite: DC 32-58.4 V, max 400 W, 8 A

  Both of the SDC and SDC Lite ports support extensive accessories.

Battery

• Cell Chemistry:LFP (lithium ferrophosphate)

• Cycle Life:Maintains over 70% capacity after 4000 cycles.

  Measured at 25/77F room temperature, being recharged in the 600W Standard Recharge Mode, and at an output power of 1000 W.

Operating Temperature

• Power Supply Temperature:-10 to 45 C (14 to 113 F)

• Recharging Temperature:0 to 45 C (32 to 113 F)

• Storage Temperature:-10 to 45 C (14 to 113 F)