The O3 anti-shake design applies four silicone damping balls to reduce vibration and filter jello, providing high-performance videos. The integrated structure adopts revolutionary modified materials to satisfy the need for rigidity and flexibility, reducing the possibility of damage to a minimum. The fuselage space is highly compatible with various video transmission systems like the O3 Air Unit and it is equipped with a convenient outlet to make the use of the SD card slot and USB faster and more effective.

After a host of testing on parameters, Cinebot25 adopts a TAKER G4 45A 8Bit AIO FC that will breathe new life into the footage-shooting experience.

Package Includes:

1x Cinebot25 quadcopter (DJI O3/PNP)

1x HQprop DT63mmx4 propellerpack

2x Battery anti-slip pads

1x 15150mm battery strap

1x 15*180mm battery strap

1x Naked GoPro base

1x Reserved screw pack

1x L-shaped screwdriver 1.5mm

1x Frequency paring pointer

1x Damping ball puncher

Features:

• Integrated external design. Equipped with reinforced carbon plate and modified material for one-piece injection molding at the bottom.
• The shock-absorbing protection cover of the camera provides better stability for footage shooting.
• Two power versions are available: the regular one with SPEEDX2 1404 motor and the superior one with SPEEDX2 1505 motor.
• The TYPE-C and BOOT button on the rear makes parameter adjustment convenient.
• Optimized silicone T-shaped antenna fixing component.
• Cinebot25 Lite quadcopter eqquiped with a LiHV 4S 720mAh battery that weighs less than 250g.
• Equipped with the new TAKER G4 45A 8Bit AIO, the G4 main controller ensures stable flight computations, while its integrated 8Bit 45A ESC boasts robust over-current capability.
• The compatibility between O3 VTX and Cabinet makes the installation of memory cards and footage loading easier.
• The customized fixing stand of the receiver simplifies the internal space.
• Diversify the selectivity of the battery with the comprehensive fixing method of aluminum components and straps.

Specifications:

Model: Cinebot25 S O3 Quadcopter

Frame: GEP-CT25 Black

Wheelbase: 115mm

FC: TAKER G4 45A AIO

MCU: STM32G473CEU6

Gyro: ICM 42688-P

FC firmware: TAKERG4AIO

ESC: 45A 8Bit ESC

Motor: SPEEDX2 1505 4300KV

Propellers: HQprop DT63mm x4

Connector: XT30

VTX: O3 AIR Unit

Camera: O3 camera

Antenna: O3 original antenna

Receiver: PNP(internal VTX receiver) / ELRS2.4G / TBS NanoRX

Weight: Cinebot25 S O3 PNP version 192.75g1g

Recommended battery:LiPo 4S 650mAh-850mAh

Flight Time5-730The reference time is based on low-speed flight. The actual time depends on individuals flying methods.

Info: