Welcome to our store!
Introducing the SpeedyBee F7 Mini FC. This flight controller is perfect for a wide range of builds big and small.Package Includes:1x SpeedyBee F7 Mini 3-6S FC (No ESC Included)1x Hardware KitSpecifications:Product NameSpeedyBee F7 Mini SpecsMCUSTM32F722IMU
Introducing the SpeedyBee F7 Mini FC. This flight controller is perfect for a wide range of builds big and small.
Package Includes:
1x SpeedyBee F7 Mini 3-6S FC (No ESC Included)
1x Hardware Kit
Specifications:
|
Product Name |
SpeedyBee F7 Mini Specs |
| MCU | STM32F722 |
| IMU(Gyro) | BMI270 for current batches; MPU6000 for old batches before May 2022. |
| USB Port Type | Type-C |
| Barometer | N/A |
| OSD Chip | AT7456Echip |
| BLE Bluetooth | Supported. Used for Flight Controller configuration(MSP should be enabled with Baud rate 115200 on UART 6) |
| WIFI | Not supported |
| Flash FC Firmware Wirelessly | Not supported. Please update firmware for this FC on the PC |
| Download/Analyze Blackbox | Not supported. Please download and analyze Blackbox data on the PC |
| DJI Air Unit Soldering Pads | Supported |
| Flash(for BlackBox) | 8MB |
| Current Sensor | Supported, Scale=250 Offset=-500 |
| BetaFlightCameraControlPad | Yes(CC pad) |
| Power Input | 3S – 6S Lipo |
| 5V Output | 6 groups of 5V output, five +5V pads and 1 BZ+ pad( used for Buzzer). Thetotal current loadis2.5A. |
| 9V Output | 2 groups of 9V output,thetotal currentload is2A. |
| 3.3V Output | Supported. Up to 500mA current load. |
| ESC Signal Pads | M1- M4 |
| UART | Full UART*3(UART1,UART2,UART3) |
| ESC Telemetry UART | R4(UART4) |
| I2C | Not supported |
| LED Pad | UsedforWS2812LED |
| Buzzer | BZ+andBZ-padusedfor5VBuzzer |
| BOOT Button | UsedtoenterDFUmode |
| RSSI Input | Not supported |
| SmartPort | Use any TX pad of UART for the SmartPort feature. |
| Supported Flight Controller Firmware | BetaFlight(Default) |
| Firmware Target Name | SPEEDYBEEF7MINIV2 for current batches(Gyro: BMI270); SPEEDYBEEF7MINI for old batches(Gyro: MPU6000) before May 2022. |
| Mounting | 20 x 20mm, 3.5mm hole diameter |
| Dimension | 30 x 30 x 7.5mm |
| Weight | 5.7g |
| Product Name | SpeedyBee 35A BLHeli_S Mini 4-in-1 ESC Specs |
| Firmware | BLHeli_S JH40 |
| Continuous Current | 35A * 4 |
| Burst Current | 45A(5seconds) |
| ESC Protocol | DSHOT300/600 |
| Power Input | 3-6S LiPo |
| Power Output | VBAT |
| ESC Telemetry | Not supported |
| Current Sensor | Support (Scale=250 Offset=-500) |
| Mounting | 20 x 20mm, 3.6mm hole diameter |
| Dimension | 35 * 35 * 5.5mm |
| Weight | 7g |
Reviews
There are no reviews yet.