The Skystars H7 with Single Gyro 30×30 FC is a modern Flight Controller designed for high performance. With support for X8 and OSD, as well as a BMI270 gyro and BMP280 barometer, this FC offers 16M Blackbox and 8 UARTS.

Package includes:

1x Skystars H743 HD Flight Controller – 30×30 – Single Gyro

1x Accessories Pack

item may vary from pictures.

Features:

• X8 support
• OSD, BMI270 gyroscope
• MCU @ 480MHz

Specs

• MCU: STM32H743VIT6, 480MHz, 1MB RAM, 2MB Flash
• Gyro: BMI270
• Baro: BMP280
• OSD: AT7456E
• Blackbox: 16M
• 8x Uarts (1,2,3,4,6,7,8) with built-in inversion.
• 8x PWM outputs
• 1x I2C
• 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
• USB Type-C(USB2.0)
• 2x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
• 1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V)
• Dual Camera Inputs switch
• VTX 10V/Vbat filtered power ON/OFF switch
• DJI FPV OSD is supported by any spare UART
• Vbat Input: 7~25V (2~6S LiPo)
• BEC: 5V 2A Continuous (Max 3A)
  LDO 3.3V: Max 250mA
• Firmware: Betaflight – SKYSTARSH7HD
• Mounting: 30.5 x 30.5mm
• Dimensions: 39.5 x 39.5 x 7.8 mm
• Weight: 10.1g