Thicc 2.1 is a 390mm 7 or 8″ X8 Cinelifter.Arms are 8mm carbon, main body plates are 2.5mm, bottom plate is 3mm. With 2 spots for 30×30 fc stacks, standoff height is 20mm. Feel free to request 25 or 30mm standoffs instead.

Thicc 2.1 has an identical layout as 2.0 and is totally cross compatible. The differences are a slightly different top plate to accommodate six dampers, and a universal cam mount.

The Thicc universal cam mount(Sold Separately)is affixed with six dampers, either Alpha Gel or Silicone. The camera is attached with two 1/4-20 screws. It is compatible with Thicc 2.0. If you have a 2.0 you can just order the cam mount, dampers and spacers are included.

The FX6 mod converts the left vertical stanchion

You can print your own partshere. Make sure to use the downwards antenna mount.

Read more about ithere.

This quad is compatible with both DJI and Analog setups with the appropriate 3D prints found in thislink.If you need the parts 3D printed, please send the appropriate STL files to [email protected], and we will invoice you separately for them! 3D printed parts need 24-48 hours to be printed and shipped depending on the size and quantity.

Check out all ourFrames,and the rest of ourShendrones Products!

Specifications:

• Arm Thiccness: 8mm
• Main Body Plate: 2.5mm
• Bottom Plate: 3mm
• Stack Mounting: Dual 30x30mm
• Standoff Height: 20mm

Package Includes:

• 1xShen Drones Thicc 2.1 7″ Frame – Carbon & Hardware Only

Note: Camera, Battery, and Electronics NOT included.