In response to our customer needs, this is our answer for all the racers in out there: The iFlight Mach R5 BNF! Equipped with XING2 2506 motors for more torque and efficiency as well as high speed and consistent lap times. Quick-swap arm assembly for easy repair on your flying spot or race day. Enhanced canopy design with low wind resistance for maximum speed and efficiency.

Browse here the iFlight Mach R5 Frame and Parts Collection.

Check out all our Analog BNF/PNP/RTFs and the rest of our iFlight Products!

FEATURES:

• Super durable design, 6mm arms and 7075 CNC middle plate
• Super lightweight but superpower with our newest XING2 2506 motors

HIGHLIGHTS:

• XING2 2506 1850KVmotors
• SucceX-D Mini F7 TwinG
• SucceX Mini 55A
• SucceX Mini Force 5.8GHz 600mW VTX Adjustable

Tips:

VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you’re flying legal frequencies and use our prepared Betaflight VTX tables according to your region.

Specifications:

FRAME //Mach R5

• -Wheelbase: 215mm
• -Main body dimension: 152*152mm
• -Arm thickness: 6mm
• -Bottom plate thickness: 3mm
• -Top plate thickness: 2.5mm
• -Middle Plate thickness: 2.5mm CNC 7075 aluminum alloy
• -TPU Camera plate
• -FC: 30.5*30.5/25.5*25.5mm/20*20mm
• -FPV Cam:14mm /19mm Micro / 20mm

FC // SucceX-D Mini F7 2-6S TwinG

Specification:

• MCU: STM32 F722
• Gyro: MPU6000
• Blackbox:32MB
• BEC output:5V 2.5A/9V 2.5
• Barometer: NO
• Connector: Micro-USB
• OSD:IFLIGHT OSD (AT7456E)
• FC FirmwareIFLIGHT_F722_TWING
• Mounting pattern: 20.5*20.5mm 4mm
• Dimensions: 29*29mm
• Weight: 5.6g

ESC // SucceX Mini 55A 2-6S ESC

Specification:

• Dimension: 31*29.5mm
• Mounting Holes:20*20/4mm
• Input: 2-6S
• Weight:10.8g
• Constant: 55A / Burst: 60A
• BLHeli:BLHeli 32
• Telemetry: No
• Current sensor: Yes
• Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
• Target: iFlight-G071-4IN1

VTX //SucceX Mini Force 5.8GHz 600mW VTX Adjustable

Specification:

• Power: PIT/25/200/400mW/600mW
• Antenna interface:MMCX
• VTX protocol : IRC Tramp
• Output 40 channels
• Size: 29*29mm
• Mounting pattern:20*203/25*25 mm2
• Weight: 4g

Mach R5 Analog Quad BNF Included Components and Parts

• Prebuilt and tested Quadcopter
• 1 xMach R5 Frame
• 1 xRaceCam R1 Micro Camera
• 1 x SigmaRHCPIpex/UFL 5.8gantenna
• 2 sets x Nazgul R5 3-blades (Set of 4 – Color may vary)
• 1 x20*250mmMicrofiber PU Leather Battery Strap (Color May Vary)\

PRE-TUNED & PRE-SETUP:

• -Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
• -To restore lost tunes or updates, please check our linked article on”Firmware/Factory Dumps”
• -Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!
• -Please check our linked article on”How to disable Angle-Mode, activate Acro-Mode”
• -GPS Rescue is OFF by default to prevent unwanted or unexpected drone behavior.
• -Please check our linked article on”GPS Rescue Mode // Setup”