The principle of the camera stabilization using brushless direct-drive motors, In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo.Special designed for SLR aerial and Z axis DIY Parts

Features

Sealed Case to prevent contamination by dust and dirt.

Hollow shaft for slipring

Configuration: 36N42P ,prove more torque.

Specifications

Model: GM110-10

Motor Out Diameter: 1100.05mm

Configuration: 36N/42P

Motor Height: 260.2mm (Included with Encoder housing)

Hollow Shaft(OD): 25-0.008/-0.012 mm

Hollow Shaft(ID): 22 0.05/ 0.1 mm

Wire Length: 6103mm

Cable AWG: #24

Motor Weight: 5321g

Wire plug: 2.5mm dupont connector

No-load current: 0.160.1 A

No-load volts: 20V

No-load Rpm: 292~323 RPM

Load current: 2A

Load volts: 20V

Load torque(gcm): 9000-15000

Motor internal resistance: 4.165%Resistance varies with temperature

High voltage test: DC500V 1mA @2sec

Rotor housing runout: 0.1mm

Steering (axle extension): clockwise

High-low temperature test:

High temperature: Keep at 60 for 100 hours, and the motor can work normally after 24 hours at room temperature

Low temperature: Keep at -20 for 100 hours, and the motor can work normally after 24 hours at room temperature

Maximum power: 80W

Working current: 4-6S

Working temperature: -20~60;10~90%RH

Packing List

1 x GM110-10 brushless gimbal motor