The GBM2804H-100T motor by iPower Motors are the ultimate brushless gimbal motor for GoPro Cameras.This motor is designed for small multi-rotor platforms looking to lift GoPro sized gear 0.5-1KG/cm Torque.The principle of the camera stabilization using brushless direct drive motors In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo.

Specifications

Model: GBM2804H-100T

Motor Out Diameter: 350.05mm

Configuration: 12N/14P

Motor Height: 150.2mm (Included with Encoder housing)

Hollow Shaft(OD): 7-0.008/-0.012 mm

Hollow Shaft(ID): 5 0.05/ 0 mm

Wire Length: 3003mm

Cable AWG: #28

Motor Weight: 390.2g

Wire plug: N/A

No-load current: 0.070.05 A

No-load volts: 10 V

No-load Rpm: 1468~1622 RPM

Load current: 0.8A

Load volts: 10 V

Load torque(gcm): 250-350

Motor internal resistance: 105%Resistance varies with temperature

High voltage test: DC500V 1mA @2sec

Rotor housing runout: 0.1mm

Steering (axle extension): clockwise

High-low temperature test:

High temperature: Keep at 60 for 100 hours, and the motor can work normally after 24 hours at room temperature

Low temperature: Keep at -20 for 100 hours, and the motor can work normally after 24 hours at room temperature

Maximum power: 25W

Working current: 2-3S

Working temperature: -20~60;10~90%RH

Packing List

1 x GBM2804H-100T